UBISLATE 7ci (Working ROM…Found) – issues of Tablet ? ?


UBISLATE 7Ci..

/ I HAVE FOUND A WORKING FIRMWARE (rom ) FOR UBISLATE 7CI (aakash 2)..

UBISLATE 7CI IS MADE FROM SAME CHIPSET USED IN CHINESE TABLET ALLWINNER A13..
IF YOU HAVE EVER OPENED THE COVER OF TABLET AND LOOKED INSIDE YOU CAN SEE ALL WINNER A13 MOTHERBOARD……

BUT THE ORIGINAL FIRMWARE IS SLIGHTLY DIFFERENT SINCE DATAWIND USES SOME KIND OF MODIFICAION…


AFTER LOT OF EFFORT I HAVE FOUND A WORKING ALLWINNER FIRMWARE INUBISLLATE 7CI TABLET..THE ONLY ISSUE WAS THE TOUCHSCREEN AXIS IS INVERTED…….

THE X-AXIS OF TOUCHSCREEN IS INVERTED…

TO SLOVE THIS ISSUE I USED A TOOL TO INVERT THE X AXIS AND THE TOUCHSCREEN RESPONSE IS CORRECT NOW……

TRY THIS OUT!!!!!!

STEPS TO FLASH THE TABLET

1.DOWNLOAD A13 FIRWARE FROM THE LINK BELOW…

https://www.dropbox.com/s/88s3cw5u3uabtxv/Allwiner%20a13%20dump.img

2.DOWNLOAD LIVESUITE 1.09 (A FLASHING UTILITY FOR A13 TABLETS)..

http://www.filecrop.com/Livesuit-1.09.html

3.DOWNLOAD TOUCHSCREEN FIX PACKAGE…

http://www.mediafire.com/download/6ebpxbpgselb66p/script-bin.rar

4. Put Your Ubislate off means complete power off

5. Run Livesuite

6. Select/Open ALLWINNER A13 DUMP Img File

7. Plug oneside of Data cable to computer only not Along with Tablet (remember)

8. Now keep pressing and holding Volume up+ button and now attach data cable Along with tablet ( UBISLATE)

9. Now Popup of live suite will say Yes and again Yes press yes both times and … release the volume up+ button

10. Now update will start…. wait for 5 min

11. 100% up gradation complete .

12 NOW REBOOT YOUR TABLET.YOUR TABLET WOULD PROBABLY LOAD THE ANDROID OS AND YOUR TOUCHSCREEN SHOULD WORK BUT THE X AXIS WILL BEHAVE INVERTED. CONNECT A USB MOUSE USING OTG CABLE .THE TURN ON USB DEBUGGING IN YOUR TABLETS SETTINGS UNDER DEVELOPER TOOLS. CONNECT THE TABLET TO PC AND WAIT TO INSTALL THE USB DRIVERS FOR ADB.IF YOU FIND DIFFICULT TO FIND THE USB DRIVERS JUST INSTALL PDANET SOFTWARE WHICH WILL INSTALL THE USB DRIVER.DOWNLOAD PDANET

FIXING TOUCHSCREEN AXIS(CHANGE X-AXIS):

EXTRACT THE SCRIPT-BIN ARCHIVE YOU DOWNLOADED IN STEP 3 TO A FOLDER

OPEN THE FOLDER WHERE YOU HAVE EXTRACTED THE SCRIPT-BIN ARCHIVE.

execute the changexy.cmd.and follow the numbers
1. Pull script.bin from tablet
2. Transform script.bin to script.fex
3. Revert X axe
4 Change the current value to opposite value using the provided options.(IF current is 0 change to 1 and Vicversa).
5. Transform script.fex to script.bin
6. Push scrip.bin to tablet
7. Reboot tablet
……………………..Yes you have done it………………………………………… .

Now enjoy your new Firmware………………

THIS TRICK HAVE BEEN TESTED AND VERIFIED IN UBISLATE 7ci TABLET AND GUARENTEE WORKING!!!!!!!!!!!!!