Samsung A510F And A510FD FRP Remove successfull

Some time people use reset method but after the reset

you forget the gmail account, it hangs on setup wizard and you can’t enter into menu option,

So we need to reset the frp account by pc method.

In the professional business we use z3x box for the account but this model can’t reset with simple way.

So one trick we use for remove the account from the phone.

Method: First flash the phone with this firmware  Download

Then use z3x box and use option reset frp, after this work you can enjoy ……..

Your phone will be unlocked.

Samsung s6 sm-G920F charging paused by temperature solution

Some time we face charging problem in Samsung S6 phone .

During the charging screen shows an error  ” charging paused by temperature”.

This type of problem means voltage not regulate in proper way, so the charging ic heat-up

and phone shows an error of temperature too high.

Solution: Just replace the highlighted component which shows in the upper picture solution, because this

component not work properly, after the replace highlighted component the phone’s charging work properly.

 

 

Samsung J100H Speaker or Ringer or headphone problem repair solution

Samsung J100H Speaker or Ringer or headphone not work problem solution here:

When the speaker or ringer not work of j100h then we resold or replace the Sound ic,

which is highlighted in the picture solution.

You need to change the speaker or ringer first  before apply this solution.

If problem remains then check ringer ways.

 

Samsung g355h not proper on only vibration (solution)

Samsung G355h not proper on, when you hit the power button phone shows

only vibration but not show display and not light on . This type of problem shows that

some shortage in it.

Solution: Just remove the highlighted component which shows in the upper picture.

 

 

 

Samsung G355H fake charging problem solution

Many people ask me about auto charging show on the screen of Samsung G355h,

but not save the charging or not store the charging its called fake charging, so i give you

fake charging solution. This solution only for hardware technician only because non professional

work damage the phone.

Solution: First replace the charging connector, if problem remains then change the highlighted ic

named U404 which already mention in the picture. You can sort out your problem easily.

 

Htc m8 sprint unlock successfully

Htc m8 sprint unlock successfully with the help of falcon box.

Unlock Method:

Dial ##3424# and Enable DM..
And Select HTC Diagnostic Interface.

Then use option unlock ……

 

Log info here:

Checking User Details.. ok
Checking User Activations.. ok
Checking Device State…
Grant any SuperUser and/or adb RSA requests on your device
Normal mode
Qualcomm Detected
Elapsed: 9 seconds
Checking User Details.. ok
Checking User Activations.. ok
Checking Device State…
Grant any SuperUser and/or adb RSA requests on your device
Normal mode
Qualcomm Detected
Starting Htc Sprint Process..
Manufacturer : HTC
Model : 831C
Android Version : 6.0
Platform : msm8974
Release Tags : release-keys
Network Type : Unknown
Operator : Sprint
Ril-Imp : Qualcomm RIL 1.0
Region : US
Hardware : qcom
Baseband : 1.09.20.1112
Checking Device State…
Grant any SuperUser and/or adb RSA requests on your device
Normal mode
Qualcomm Detected
## Check device screen if SU needs your permission ##
Checking SuperUser package…
Checking Executable SuperUser(bin)…
Checking Executable SuperUser(xbin)…
Executable SuperUser file not found
— Device is NOT ROOT —
Checking Root Permissions…
Sending data to device….
Data sent successfully
Command executed
— You are NOT ROOT —
Executing Sys Check..
Reading Data…(DO NOT DISCONNECT DEVICE)
Sending data to device….
Data sent successfully
Sending data to device….
Data sent successfully
Decrypting Data…
Unlocking Success..
Msl/Spc : 342453
Elapsed: 42 seconds

 

ASUS ZENPHONE MAX FRP RESET DONE

ASUS ZENPHONE MAX FRP RESET done with the help of miracle box.

You can see in the following picture also……

Just follow the picture for remove the frp of asus zenphone mx.

If you face some problem just do as same…. like picture.

 

 

Huawei y311 (LUA-L02) UNLOCK Successfully

You can unlock this model with the help of chimera tool,

You can also see log info in the following :

Chimera Mobile Phone Utility version…

[Removing network lock…]

Searching for Manufacture port…
Switching to diag mode.
Phone version:
BB chip version: mt6735m,S01
DSP fw version: Wed May 4 21:17:50 CST 2016
DSP patch version: n/a
Eco version: n/a
Hardware version: ALPS.L1.MP3.V2.95_OT6735M.35GU.LU.L1_P1
Melody version: S01
Software version: n/a

Clearing network lock…
done.

Turning off the phone…
done.

Finished successfully.

Downgrade iOS 10.3 To iOS 10.2.1 Method

Tool: 3utools

Method:

Step1: Download and install the latest 3uTools on PC. Launch 3uTools and connect your iPhone to it. Click Toolbox ->Backup/Restore -> Backup iDevice.

Step2: After iDevice is backup successfully, you need to flash your iDevice using 3uTools. Click Flash & JB -> select the firmware 10.2.1-> click Flash, and then just wait until this process is completed. Remember to activate your iDevice after flashing.

Step3: When iDevice is activated, please back to Toolbox, click Backup/Restore -> Backups Management -> Open location.

 

Step4: Find Info.plist file, and open it using notepad.

Step5: Find 14E5260b,and then replace it with 14C92.

 

 

Step6: Find 10.3, and then replace it with 10.2.

 

Step7: After modification, please back to Toolbox -> click Restore Data. Select the backups you just modified and restore it.

 

Huawei Y511-U30 Reset Pin Lock successfully (Without Lose data)

USB Reset Pin lock(EMMC)

>>Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
>>Analysis of USB port,Please insert phone USB cable.
>>Connecting…
>>CPU TYPE:MT6572
>>Hardware version:CA01
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x90014A4834473164048603A42848B191
>>EMMC_PRODUCT_NAME: SAMSUNG :0x483447316404
>>EMMC_BOOT1_SIZE: 0x00200000
>>EMMC_BOOT2_SIZE: 0x00200000
>>EMMC_PRMB_SIZE: 0x00200000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0E7000000(3.61 G)
>>Analysis of system files…
>>PRELOADER:>>addr:0x000000 –length:0x600000
>>MBR:>>addr:0x600000 –length:0x080000
>>EBR1:>>addr:0x680000 –length:0x080000
>>PRO_INFO:>>addr:0x700000 –length:0x300000
>>NVRAM:>>addr:0xA00000 –length:0x500000
>>PROTECT_F:>>addr:0xF00000 –length:0xA00000
>>PROTECT_S:>>addr:0x1900000 –length:0xA00000
>>SECCFG:>>addr:0x2300000 –length:0x020000
>>UBOOT:>>addr:0x2320000 –length:0x060000
>>BOOTIMG:>>addr:0x2380000 –length:0x600000
>>RECOVERY:>>addr:0x2980000 –length:0x600000
>>SEC_RO:>>addr:0x2F80000 –length:0x040000
>>MISC:>>addr:0x2FC0000 –length:0x080000
>>LOGO:>>addr:0x3040000 –length:0x300000
>>EXPDB:>>addr:0x3340000 –length:0xA00000
>>ANDROID:>>addr:0x3D40000 –length:0x28A00000
>>CACHE:>>addr:0x2C740000 –length:0x17800000
>>USRDATA:>>addr:0x43F40000 –length:0x52C00000
>>FAT:>>addr:0x96B40000 –length:0x000000
>>BMTPOOL:>>addr:0xFFFF00A8 –length:0x150000
>>>>Format addr:0x43F40000 –Format length:0x52C00000
>>Read phone information success.
>>Check the data complete.
>>Successfully reset lock is 1234