Samsung s6 sm-G920F charging paused by temperature solution

Some time we face charging problem in Samsung S6 phone .

During the charging screen shows an error  ” charging paused by temperature”.

This type of problem means voltage not regulate in proper way, so the charging ic heat-up

and phone shows an error of temperature too high.

Solution: Just replace the highlighted component which shows in the upper picture solution, because this

component not work properly, after the replace highlighted component the phone’s charging work properly.

 

 

Samsung J100H Speaker or Ringer or headphone problem repair solution

Samsung J100H Speaker or Ringer or headphone not work problem solution here:

When the speaker or ringer not work of j100h then we resold or replace the Sound ic,

which is highlighted in the picture solution.

You need to change the speaker or ringer first  before apply this solution.

If problem remains then check ringer ways.

 

Samsung g355h not proper on only vibration (solution)

Samsung G355h not proper on, when you hit the power button phone shows

only vibration but not show display and not light on . This type of problem shows that

some shortage in it.

Solution: Just remove the highlighted component which shows in the upper picture.

 

 

 

Samsung G355H fake charging problem solution

Many people ask me about auto charging show on the screen of Samsung G355h,

but not save the charging or not store the charging its called fake charging, so i give you

fake charging solution. This solution only for hardware technician only because non professional

work damage the phone.

Solution: First replace the charging connector, if problem remains then change the highlighted ic

named U404 which already mention in the picture. You can sort out your problem easily.

 

Htc m8 sprint unlock successfully

Htc m8 sprint unlock successfully with the help of falcon box.

Unlock Method:

Dial ##3424# and Enable DM..
And Select HTC Diagnostic Interface.

Then use option unlock ……

 

Log info here:

Checking User Details.. ok
Checking User Activations.. ok
Checking Device State…
Grant any SuperUser and/or adb RSA requests on your device
Normal mode
Qualcomm Detected
Elapsed: 9 seconds
Checking User Details.. ok
Checking User Activations.. ok
Checking Device State…
Grant any SuperUser and/or adb RSA requests on your device
Normal mode
Qualcomm Detected
Starting Htc Sprint Process..
Manufacturer : HTC
Model : 831C
Android Version : 6.0
Platform : msm8974
Release Tags : release-keys
Network Type : Unknown
Operator : Sprint
Ril-Imp : Qualcomm RIL 1.0
Region : US
Hardware : qcom
Baseband : 1.09.20.1112
Checking Device State…
Grant any SuperUser and/or adb RSA requests on your device
Normal mode
Qualcomm Detected
## Check device screen if SU needs your permission ##
Checking SuperUser package…
Checking Executable SuperUser(bin)…
Checking Executable SuperUser(xbin)…
Executable SuperUser file not found
— Device is NOT ROOT —
Checking Root Permissions…
Sending data to device….
Data sent successfully
Command executed
— You are NOT ROOT —
Executing Sys Check..
Reading Data…(DO NOT DISCONNECT DEVICE)
Sending data to device….
Data sent successfully
Sending data to device….
Data sent successfully
Decrypting Data…
Unlocking Success..
Msl/Spc : 342453
Elapsed: 42 seconds

 

ASUS ZENPHONE MAX FRP RESET DONE

ASUS ZENPHONE MAX FRP RESET done with the help of miracle box.

You can see in the following picture also……

Just follow the picture for remove the frp of asus zenphone mx.

If you face some problem just do as same…. like picture.

 

 

Huawei y311 (LUA-L02) UNLOCK Successfully

You can unlock this model with the help of chimera tool,

You can also see log info in the following :

Chimera Mobile Phone Utility version…

[Removing network lock…]

Searching for Manufacture port…
Switching to diag mode.
Phone version:
BB chip version: mt6735m,S01
DSP fw version: Wed May 4 21:17:50 CST 2016
DSP patch version: n/a
Eco version: n/a
Hardware version: ALPS.L1.MP3.V2.95_OT6735M.35GU.LU.L1_P1
Melody version: S01
Software version: n/a

Clearing network lock…
done.

Turning off the phone…
done.

Finished successfully.

Downgrade iOS 10.3 To iOS 10.2.1 Method

Tool: 3utools

Method:

Step1: Download and install the latest 3uTools on PC. Launch 3uTools and connect your iPhone to it. Click Toolbox ->Backup/Restore -> Backup iDevice.

Step2: After iDevice is backup successfully, you need to flash your iDevice using 3uTools. Click Flash & JB -> select the firmware 10.2.1-> click Flash, and then just wait until this process is completed. Remember to activate your iDevice after flashing.

Step3: When iDevice is activated, please back to Toolbox, click Backup/Restore -> Backups Management -> Open location.

 

Step4: Find Info.plist file, and open it using notepad.

Step5: Find 14E5260b,and then replace it with 14C92.

 

 

Step6: Find 10.3, and then replace it with 10.2.

 

Step7: After modification, please back to Toolbox -> click Restore Data. Select the backups you just modified and restore it.

 

Huawei Y511-U30 Reset Pin Lock successfully (Without Lose data)

USB Reset Pin lock(EMMC)

>>Operation:
1. Power off the phone.
2. Please insert USB cable within 20 seconds.
>>Analysis of USB port,Please insert phone USB cable.
>>Connecting…
>>CPU TYPE:MT6572
>>Hardware version:CA01
>>Software version:0000
>>SecCfgVal :0x00000000
>>BromVersion :0xFF
>>BLVersion :0x01
>>Boot downloading complete!
>>EMMC_ID:0x90014A4834473164048603A42848B191
>>EMMC_PRODUCT_NAME: SAMSUNG :0x483447316404
>>EMMC_BOOT1_SIZE: 0x00200000
>>EMMC_BOOT2_SIZE: 0x00200000
>>EMMC_PRMB_SIZE: 0x00200000
>>EMMC_GP1_SIZE: 0x00000000
>>EMMC_GP2_SIZE: 0x00000000
>>EMMC_GP3_SIZE: 0x00000000
>>EMMC_GP4_SIZE: 0x00000000
>>EMMC_USER_SIZE: 0x0E7000000(3.61 G)
>>Analysis of system files…
>>PRELOADER:>>addr:0x000000 –length:0x600000
>>MBR:>>addr:0x600000 –length:0x080000
>>EBR1:>>addr:0x680000 –length:0x080000
>>PRO_INFO:>>addr:0x700000 –length:0x300000
>>NVRAM:>>addr:0xA00000 –length:0x500000
>>PROTECT_F:>>addr:0xF00000 –length:0xA00000
>>PROTECT_S:>>addr:0x1900000 –length:0xA00000
>>SECCFG:>>addr:0x2300000 –length:0x020000
>>UBOOT:>>addr:0x2320000 –length:0x060000
>>BOOTIMG:>>addr:0x2380000 –length:0x600000
>>RECOVERY:>>addr:0x2980000 –length:0x600000
>>SEC_RO:>>addr:0x2F80000 –length:0x040000
>>MISC:>>addr:0x2FC0000 –length:0x080000
>>LOGO:>>addr:0x3040000 –length:0x300000
>>EXPDB:>>addr:0x3340000 –length:0xA00000
>>ANDROID:>>addr:0x3D40000 –length:0x28A00000
>>CACHE:>>addr:0x2C740000 –length:0x17800000
>>USRDATA:>>addr:0x43F40000 –length:0x52C00000
>>FAT:>>addr:0x96B40000 –length:0x000000
>>BMTPOOL:>>addr:0xFFFF00A8 –length:0x150000
>>>>Format addr:0x43F40000 –Format length:0x52C00000
>>Read phone information success.
>>Check the data complete.
>>Successfully reset lock is 1234

IPhone restore problem solution

Error 1
Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.

Error -1
Error occurs when one uses the “last ditch” method for preventing baseband updates on the iPhone 4. The baseband does not get updated using this method. Use FixRecovery to kick it out of recovery mode.

Error 2
Sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. Device isn’t bootable.

Error 6

Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.

Error 9
Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.
Rebooting your PC may resolve this issue. Aslo it can be connection issue.

Error 10
LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.

Error 11

Removed bbfw file in the firmware folder of an unzipped IPSW.

Error 13

Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
Error 13 may also signify a USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn’t bootable.

Error 14

Custom firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn’t working. Device isn’t bootable. 2
USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn’t bootable.

Error 17

Custom firmware update fail (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn’t working.

Error 18
This occurs when the media library on the device is corrupt and cannot be modified or updated. Updating to the latest version of iTunes and then restoring should resolve this issue.


Error 20

Reportedly happens during failed downgrade attempts, Some have seen success afterwards by doing the downgrade from DFU mode instead of the normal Recovery mode.

Error 21
Error when using Sauriks server for a restore with iOS 5.x in the recovery mode at least on a A5 device. This error can also happen when you try to restore an iPod with hardware dfu. Use iREB r5 to solve this. or You are trying to update to a beta firmware without UDID activation.

Error 23
Baseband Communication error (Hardware), Most probably Baseband chip is faulty.

Error 26
False version of the NOR flash firmware. Use the correct sn0wbreeze version.

Error 27
modified the restore.plist so it would flash and also exchanged RestoreRamDisk and kernelcache. restore the original iOS.

Error 28

The problem is a bad dock connector on the iPhone. Must change the connector. If you have tried almost everything, reset the logic board leave uncharged for 2-3 days or remove battery for an hour. If doesn’t work, the flash memory is damage .

Error 29

You might need to change the battery. See Apple discussions thread about this problem.

Error 31

DFU Loop, Sometimes during the restore with your messed-up IPSW, iTunes will return error 31. This is what’s referred to as a DFU loop. The only solution is to restore a working firmware.

Error 34
Hard disk is run out of space when trying to download. Clear space and then continue downloading.

Error -35
Error when downloading songs purchased on iTunes, See Apple’s KB article.

Error 37

iPod touch 2G LLB patched with the 0x24000 Segment Overflow was used on an iPhone 3GS custom firmware. Known on damaged bundles from unofficial PwnageTool distributions or bundles.

Error 40

Hacktivation bug in Sn0wbreeze, Use update one..

Error -50
Delete Storm Vedio, QuickTime, iTunes, then reinstall iTunes. See also Apple’s KB article.

Error 1002
Are you restoring to a stock apple firmware or a custom pwn firmware? Either way make sure you are in DFU mode first.

Error 1004

This is caused by a failure to match the Baseband Nonce currently in memory to the Nonce returned in the BasebandFirmware SHSH blob. This is a normal part of iPhone 4 local restores via TinyUmbrella.

Error 1011
The file iTunesMobileDevice.dll is damaged or updated.

Error 1013

Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.0.2 firmware downgraded from 1.1.1)

Error 1014

This error is down to itunes not liking your USB ports on your computer. Use a different USB slot or a different computer if possible. That is the easiest fix!

Error 1015

Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with 1.1.1 firmware downgraded from 1.1.2) Baseband firmware on the IPSW is higher than the baseband firmware on the iPad/iPhone.

Error 1050

Bad response from gs.apple.com OR need iREB for preparing the device for restoring to custom IPSW

Error 1394
When Spirit2Pwn flashes parts of the boot chain on iOS 4, the device may crash into DFU Mode.

Error 1413

Restart computer; change USB port; reinstall system. See also Apple’s KB article.

Error 1415

Restart computer; change USB port; reinstall system.

Error 1417

Restart computer; change USB port; reinstall system.

Error 1418

Restart computer; change USB port; reinstall system.

Error 1428

Restart computer; change USB port; reinstall system.

Error 1600

Custom firmware can’t be restored on a device with DFU Mode. Use Recovery Mode.

Error 1601
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes

Error 1602
Restart computer; change computer; reinstall system.

Error 1603

False kernelcache patch. Known on damaged bundles from unofficial PwnageTool distributions or bundles. See also Apple KB article

Error 1604

Device was not pwned (signature checks were not blocked). Custom firmware can’t be restored.

Error 1611

iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.

Error 1618
Missing system files or corrupt data in iTunes installation. Try to uninstall iTunes, restart computer, install again. This error also occurs for iTunes in Windows 8 for reasons currently unknown.

Error 1619

iTunes is too old and couldn’t read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.

Error 1644

IPSW was moved during prepare with iTunes. Try it again and don’t move the IPSW.

Error 1646

iTunes expected the device to be in a different state (Example: booted into iOS rather than jumping to iBEC).

Error 2001
The Mac OS X kernel extension “IOUSBFamily” that was bundled with late 2008 / early 2009 MacBooks, has a bug where it fails to properly recognize an iDevice in DFU Mode. It can be resolved by updating to 10.5.7 (or later), or using a USB hub.

Error 2002

iTunes can’t connect because another program is using it or it’s disconnected during the Apple Server check.

Error 2003
Connection problem; change USB cable and check USB port.

Error 2005
Problem connecting. Probably a hardware failure.
Somebody reported that reinstalling the USB drivers fixed the problem.

Error 2006
Replace the USB cable with a newer one and/or disconnect all other USB devices, then retry.

Error 2009
remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore.

Error 3XXX
iTunes can’t connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.

Error 3002

Update to an older firmware isn’t working, because Apple is no longer handing out SHSHs for the device/firmware combination.

Error 3004

No internet connection during the firmware restore.

Error 3014

False edited hosts. The SHSH request couldn’t be completed. No connection to the Apple Server, Sauriks Server or localhost.

Error 3123
Something dealing with movie rentals.

Error 3194

Right-click on QuickTimePlayer.exe choose Properties from the shortcut menu click on the Compatibility tab. Deselect the checkbox labeled “Run this program in compatibility mode for..

Error 3194

Occurs when trying to install an old firmware and Apple’s server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik’s Cydia server where they are backed up (or localhost if you have it yourself).

Error 3195

“An internal error occurred.” Missing SHSH for the firmware. Maybe the same as “This device isn’t eligible for the request build.” but with an cache error.

Error -3198
Error downloading, try again. or This device isn’t eligible for the requested build.

Error 3200
You are trying to update to iOS 5, when infact, the IPSW file has only a Restore Ramdisk.

Error -3259

Connection timeout, try again.

Error -5000

There is a problem with the permissions of the Mobile Application folder. The App you’ve tried to download in iTunes couldn’t be saved.

Error 9008
Error downloading, try again.

Errors 9800
Set exact date, restart computer. See also Apple’s KB article.

Error 9808
Computer system time incorrect.

Error 9812
Check system time, reset Internet connection, update root certificates.

Errors 9814
Set exact date, restart computer. See also Apple’s KB article.

Errors 9815

Set exact date, restart computer. See also Apple’s KB article.

Error 9843

This error happens if you are logged out, try to download something from the iTunes store and if you click on “Download” and enter an account, which doesn’t have this article, this error will occur.

Error 11222

internet options Connections tab Click LAN Settings uncheck “use a proxy server”

Error 11556

You’re trying to access a section or a functionality that is not available in your country, for example iCloud in some countries.

Error 13019
Seems to be an issue with syncing media to the device.It only seems to happen on jailbroken devices. Create new user, try syncing with new user’s library.
Need restore the device….

Error 20000
Is caused by a custom theme pack on your Windows. Use default Theme.

Error 20008
This happened on a Mac with TinyUmbrella running before restoring a firmware to the Apple TV.